东莞理工学院研究生导师名单

add 东莞理工学院学姐微信
为你免费答疑

东莞理工学院机械工程学院：朱艳

2018.07-- 东莞理工学院  讲师
1. Yan Zhu, Laifei Cheng, Baisheng Ma, et al. Calculation and synthesis of ZrC by CVD from ZrCl4-C3H6-H2-Ar system with high H2 percentage. Applied Surface Science, 332 (2015) 591-598. (SCI 1区Top期刊，IF:3.387).
2. Yan Zhu, Laifei Cheng, Mingxing Li, et al. The synthesis and characterization of CVD ZrB2 coating from ZrCl4-BCl3-H2-Ar system. Ceramics International, 44 (2018) 2002-2010. (SCI 1区，IF: 2.986).
3. Yan Zhu, Laifei Cheng, Baisheng Ma, et al. Effect of CVD ZrB2 coating thickness on anti-ablation performance of C/SiC composites. Ceramics International, 44 (2018) 8166-8175. (SCI 1区，IF: 2.986).
4. Yan Zhu, Laifei Cheng, Baisheng Ma, et al. New route to synthesize ZrB2 coatings by reactive chemical vapor deposition method using Zr-BCl3-H2-Ar reagents. Surface and Coatings Technology, 337 (2018) 209-216. (SCI 1区Top期刊，IF:2.589).
5. Yan Zhu, Laifei Cheng, Baisheng Ma, et al. Thermodynamic analysis on the codeposition of ZrC-SiC by chemical vapor deposition using the ZrCl4-C3H6-MTS-H2-Ar system. Ceramics International, 40 (2014) 6427-6433. (SCI 1区，IF: 2.986).

东莞理工学院机械工程学院：陈磊

2018.1至今 东莞理工学院  教师
2015.12-2017.12 复旦大学-南方科技大学 博士后
2015.4-2015.11 南方科技大学 Research Fellow
[1] Lei Chen, Dazhi Sun, Jin Li, etc.. Exfoliation of layered zirconium phosphate nanoplatelets by melt compounding. Materials and Design. 2017, 122: 247-254.
[2] He Zhang, Lei Chen, Xiao Han, et al.. Enhanced mechanical properties of Nylon6 nanocomposites containing pristine α-zirconium phosphate nanoplatelets of various sized by melt-compounding. RSC Advances. 2017, 7: 32682.
[3] Fan Lei, Junlong Yang, Bingyu Wu, Lei Chen, Dazhi Sun. Facile design and fabrication of highly transparent and hydrophobic coatings on glass with anti-scratch property via surface dewetting. Progress in Organic Coating. 2018, 120: 28-35
[4] Haoyang Sun, Feng Jiang, Fan Lei, Lei Chen, Dazhi Sun. Graphite fluoride reinforced PA6 composites: crystallization and mechanical properties. Materials Today Communication. 2018, 16: 217-225
[5] L Chen, S Kirchberg, B Y Jiang, etc.. Fabrication of long focal length plano-convex microlens array by combining micro milling and injection molding process. Applied Optics. 2014, 53(31): 7369-7380
[6] Chen Lei, Stefan Kirchberg, Jiang Bingyan, etc.. Replication, characterization and simulation of micro injection molded microlens arrays using technical amorphous polymers. Key Engineering Materials 2013, (562-565): 458-464
[7] S. Kirchberg, C. Lei, L. Xie, G. Ziegmann,et al.Replication of precise polymeric microlens array combining diamond turning and micro injection molding. Microsystem Technologies. 2012, 18(4): 459-465
[8] 国内发明：孙大陟，陈磊，一种层状纳米颗粒、剥离方法及应用，中国发明专利（已授权），专利号：201610128428.3

东莞理工学院机械工程学院：王珂玮

2017.12-- 东莞理工学院 教师
2016.11--2017.12 佛罗里达州立大学 博士后

(1) Kewei Wang, Baisheng Ma, Tao Li, Chunxiao Xie, Zhenzhong Sun, Dianguang Liu, Jinling Liu, and Linan An. “Fabrication of high-entropy perovskite oxide by reactive flash sintering” Ceramics International, 2020, 46(11): 18358-18361
(2) Kewei Wang, Baisheng Ma, Ligong Zhang, Zhenzhong Sun, and Yiguang Wang. “Electron Transport Behavior of Polymer-derived Amorphous Silicoboron Carbonitrides” Journal of the American Ceramic Society, 102(10): 6038-6047, 2019  
(3) Kewei Wang, Xuqin Li, Baisheng Ma, Min Zhang, Jinling Liu, Yiguang Wang, Ligong Zhang, and Linan An. “Evolution in the Electronic Structure of Polymer-Derived Amorphous Silicon Carbide,” Journal of the American Ceramic Society, 98, 2153-2158, 2015
(4) Kewei Wang, Lei Luo, Yonghong Lu, Juan Yang, Yiguang Wang. “In-field Reparation of the damaged coatings for C/C composites,” Ceramics International, 41, 7549-7555, 2015
(5) Kewei Wang, Baisheng Ma, Xuqin Li, Yiguang Wang, and Linan An. “Structural Evolutions in Polymer-Derived Carbon-Rich Amorphous Silicon Carbide.” Journal of Physical Chemistry A, 119, 552-558, 2014
(6) Kewei Wang, Xuqin Li, Basheng Ma, Yiguang Wang, Ligong Zhang, and Linan An. “On Electronic Structure of Polymer-Derived Amorphous Silicon Carbide Ceramics,” Applied Physics Letters, 104, 221902, 2014
(7) Kewei Wang, Basheng Ma, Xuqin Li, Yiguang Wang, and Linan An. “Effect of Pyrolysis Temperature on the Structure and Conduction of Polymer-Derived SiC,” Journal of the American Ceramic Society, 97, 2135-8, 2014
(8) Kewei Wang, Basheng M, Yiguang Wang, and Linan An. “Complex Impedance Spectra of Polymer-Derived Silicon Oxycarbides,” Journal of the American Ceramic Society, 96, 1363-5, 2013

东莞理工学院机械工程学院：赵愈亮

2018.07-- 东莞理工学院 教师

1. Y.L. Zhao, W.W. Zhang, B. Koe, W.J. Du, M.M. Wang, W.L. Wang, E. Boller, A. Rack, Z.Z. Sun, D. Shu, B.D. Sun, J.W. Mi, Multiscale characterization of the nucleation and 3D structure of Al3Sc phases using electron microscopy and synchrotron X-ray tomography, Materials Characterization, 2020, 164, 110353. (中科院SCI一区, IF: 3.562)
2. Y.L. Zhao, Z. Wang, C. Zhang, W.W. Zhang, Synchrotron X-ray tomography investigation of 3D morphologies of intermetallic phases and pores and their effect on the mechanical properties of cast Al-Cu alloys, Journal of Alloys and Compounds, 2019, 777: 1054-1065. (中科院SCI二区, IF: 3.799)
3. Y.L. Zhao, D.F. Song, B. Lin, C. Zhang, D.H. Zheng, S. Inguva, T. Li, Z.Z. Sun, Z. Wang, W.W. Zhang, 3D characterization of ultrasonic melt processing on the microstructural refinement of Al-Cu alloys using synchrotron X-ray tomography, Materials Characterization, 2019, 153: 354-365. (中科院SCI二区, IF: 3.22)
4.Y.L. Zhao, D.F. Song, B. Lin, C. Zhang, D.H. Zheng, S. Inguva, T. Li, Z.Z. Sun, Z. Wang, W.W. Zhang, 3D characterization of ultrasonic melt processing on the microstructural refinement of Al-Cu alloys using synchrotron X-ray tomography, Materials Characterization, 2019, 153: 354-365. (中科院SCI二区, IF: 3.22)
5.Y.L. Zhao, W. Du, B. Koe, T. Connolley, S. Irvine, P. K. Allan, C. M. Schlepütz, W. Zhang, F. Wang, D.G. Eskin and J. Mi, 3D Characterisation of the Fe-rich intermetallic phases in recycled alloys by synchrotron X-ray microtomography and skeletonisation, Scripta Materialia, 2018, 146, 321-326. (中科院SCI一区, IF: 3.747)
6. Y.L. Zhao, W.W Zhang, C. Yang, D.T. Zhang, Z. Wang, Effect of Si on Fe-rich intermetallic formation and mechanical properties of heat-treated Al-Cu-Mn alloys, Journal of Materials research. 2018, 33 (8): 898-911. (中科院SCI三区, IF: 1.673)
7. Y.L. Zhao, W.W. Zhang, F.S. Meng, Z. Wang, D.T. Zhang and C. Yang, Microstructure and mechanical properties of Al-5.0Cu -0.6Mn-0.6Fe alloy produced by ultrasonic vibration and applied pressure, Rare Metal Materials and Engineering, 2018, 47 (2): 457-462. (中科院SCI四区, IF: 0.258)
8. W.W. Zhang, Y.L. Zhao, D.T. Zhang, Z.Q. Luo, C. Yang and Y.Y. Li, The effect of Si addition on the microstructure and tensile properties of casting Al-5.0Cu-0.6Mn-1.2Fe alloys, Transactions of Nonferrous Metals Society of China, 2018, 28:1061-1072. (中科院SCI四区, IF: 1.342)
9. Y.L. Zhao, Z.X. Zhu, Y, Xie and F.C. Yin, Phase equilibria of Ni-Sb-Zn Ternary system at 600 °C, International Journal of Materials Research, 2016, 107, 894-902. (中科院SCI四区, IF: 0.681)
10. Y.L. Zhao, Z.X. Zhu, F.C. Yin, Z.H. Long, and Y. Wu, 450 °C isothermal Section of the Ni-Sb-Zn Ternary System at the Zn-Rich Corner, Journal of Phase Equilibria and Diffusion, 2014, 35, 186-194. (中科院SCI四区, IF: 0.938)
11. Z.X. Zhu, Y.L. Zhao, M.X. Zhao, F.C. Yin, Z. Li, and Y.X. Liu, The Zn-Rich Corner of the Zn-Fe-Al-Sb Quaternary System at 450 °C, Journal of Phase Equilibria and Diffusion, 2013, 34, 474-483. (中科院SCI四区, IF: 0.938)
12. Y.L. Zhao, Y. Zhang, Z. Luo, Z. Wang and W.W. Zhang, Effect of ultrasonic vibration and applied pressure on the microstructure and mechanical property of Al-5.0Cu-0.6Mn-0.6Fe alloys, Materials Science Forum, 2016, 850: 559-565. (EI)
13. 赵愈亮，孟凡生，张 杨，张大童，杨 超，张卫文, Si 对挤压铸Al-5.0Cu-0.6Mn-0.7Fe 合金显微组织和力学性能的影响, 中国有色金属学报, 2015, 25, 3040-3050. (EI)
14. Y.L. Zhao, W. Du, B. Koe, T. Connolley, S. Irvine, P. K. Allan, C. M. Schlepütz, W. Zhang, F. Wang, D.G. Eskin and J. Mi, Synchrotron X-ray tomography studies of Fe-rich intermetallic phases in Al alloys, 6th Decennial International Conference on Solidification Processing, 25th-28th July 2017, Old Windsor, UK

东莞理工学院机械工程学院：徐进

2018.06-- 东莞理工学院 教师

1. Jin Xu et al, Efficient, stable and high color rendering index white polymer light-emitting diodes by restraining the electron trapping, Org. Electron., 2020, 84, 105785.(中科院SCI二区，IF 3.31)
2. Yuhao Zhang, Jin Xu* et al, Highly efficient blue light-emitting polymers containing N-(2-decyltetradecyl) carbazole [2,3-b] benzo[d]thiophene-S, S-dioxide moiety, Org. Electron., 2020, 81, 105670.(中科院SCI二区，IF 3.31)
3. Jin Xu et al, Efficient tandem polymer light-emitting diodes with PTPA-P/ZnO as the charge generation layer, J. Mater. Chem. C, 2019, 7, 8003-8010.(中科院SCI一区，IF 7.059)
4. Jin Xu et al, Near-infrared polymer light-emitting diodes based on a inverted device structure, J. Mater. Chem. C, 2019, 7,12114-12120.(中科院SCI一区，IF 7.059)
5. Feng Peng#, Jin Xu# et al, Ether-soluble hole-transporting polymers based on triphenylamine/phenothiazine moieties with shallow HOMO levels, Polym. Chem., 2019, 10, 1367-1376.(中科院SCI一区，IF 5.342)
6. Jin Xu et al, Challenging conventional wisdom: finding high-performance electrodes for light-emitting electrochemical cells, ACS Appl. Mater. Interfaces, 2018, 10, 33380−33389.(中科院SCI一区，IF 8.758)
7. Jin Xu et al, Blue light-emitting polymers containing ortho-linking carbazole-based benzothiophene-S, S-dioxide derivative, Dyes and Pigments, 2017, 138,245-254.(中科院SCI一区，IF 4.613)
8. Jin Xu et al, Highly efficient inverted blue light-emitting diodes by thermal annealing and interfacial modification, Org. Electron, 2017, 49, 1-8.(中科院SCI二区，IF 3.31)
9. Jin Xu et al, Color tuning in inverted blue light-emitting diodes based on a polyfluorene derivative by adjusting the thickness of the light-emitting layer, J. Mater. Chem. C, 2015, 3, 9819-9826.(中科院SCI一区，IF 7.059)

东莞理工学院机械工程学院：宋菊青

2016.10-- 东莞理工学院 教师

1. Juqing Song, Huichang Gao, Guanglin Zhu, Xiaodong Cao, Xuetao Shi* and Yingjun Wang*. The preparation and characterization of polycaprolactone/graphene oxide biocomposite nanofiber scaffolds and their application for directing cell behaviors, Carbon, 2015, 95(2015): 1039-1050. (中科院SCI一区，IF 8.821)
2. Juqing Song, Huichang Gao, Guanglin Zhu, Xiaodong Cao, Xuetao Shi* and Yingjun Wang*. The construction of three-dimensional composite fibrous macrostructures with nanotextures for biomedical applications, Biofabrication, 2016, 8(3): 035009. (中科院SCI一区，IF 8.213)
3. Juqing Song#, Guanglin Zhu#, Lin Wang, Geng An, Xuetao Shi* and Yingjun Wang*. Assembling of electrospun meshes into three-dimensional porous scaffolds for bone repair, Biofabrication, 2017, 9(1): 015018. (中科院SCI一区，IF 8.213)
4. Nanying Li#, Juqing Song#, Xiaoyu Li, Xuetao Shi* and Yingjun Wang*. Periosteum Tissue Engineering——A review, Biomaterials Science, 2016, 4(11): 1554-1561. (中科院SCI二区，IF 6.183)
5. Juqing Song#, Guanglin Zhu#, Huichang Gao, Lin Wang, Nanying Li, Xuetao Shi* and Yingjun Wang*. Origami meets electrospinning: a new strategy for 3D nanofiber scaffolds, Bio-Design and Manufacturing, 2018, 1(4): 254-264. (IF 4.095)
6. Yingjun Wang, Guanglin Zhu, Nanying Li, Juqing Song, Lin Wang and Xuetao Shi*. Small molecules and their controlled release that induce the osteogenic/chondrogenic commitment of stem cells, Biotechnology Advances, 2015, 33(8): 1626-1640. (中科院SCI一区，IF 10.744)
7. Nanying Li, Juqing Song, Guanglin Zhu, Xuetao Shi* and Yingjun Wang*. Alendronate conjugated nanoparticles for calcification targeting, Colloids and Surfaces B: Biointerfaces, 2016, 142(2016): 344-350. (中科院SCI二区，IF 4.389)
8. 宋菊青, 丁鹏, 陈盛贵, 董晓明. 一种家用娱乐装置. 中国专利（已授权）, 专利号：ZL201821912802.X.
9. 宋菊青, 丁鹏, 陈盛贵, 黄俊逸. 一种DLP-3D打印机, 中国专利（已授权）, ZL201821912771.8.
10. 陈盛贵, 宋菊青, 卢秉恒. 一种可直接触碰到产品的3D打印机. 中国专利（已授权）, ZL 201721430364.9.
11. 李楠, 宋菊青, 陈盛贵, 卢秉恒. 一种带活动成型台的3D打印设备. 中国专利（已授权），专利号：ZL 201721430597.9.

东莞理工学院机械工程学院：赵成亮

办公室电话  Office Phone：
E-mail： zhaocl@dgut.edu.cn

教育背景/经历　Education
2015.09-2018.06 中国科学院大学 博士生

2009.09-2012.07 中国科学院研究生院 硕士生

2005.09-2009.07 中国地质大学 本科生

工作经历　Work Experience
2018.06-- 东莞理工学院  讲师

2012.09-2015.07 中国科学院宁波材料技术与工程研究所 工程师

科研情况　Scientific
长期从事铁基、钴基非晶/纳米晶软磁材料的开发与应用技术研究

1. 2019国家自然科学基金青年项目：铁基非晶合金的取向纳米晶化及其力学和磁性能研究，主持

2. 2019年广东省重大科技专项资金项目: 新一代非晶合金的设计、制备与先进制造基础研究，参与

出版物　Publications
1. Chengliang Zhao, Anding Wang, Shiqiang Yue, et. al, Significant improvement of soft magnetic properties for Fe(Co)BPSiC amorphous alloys by magnetic field annealing, Journal of Alloys and Compounds, 742 (2018) 220-225.

2. Chengliang Zhao, Anding Wang, Shiqiang Yue, et. al, Correlation between soft-magnetic properties and Tx1-Tc in high Bs FeCoSiBPC amorphous alloys, Journal of Alloys and Compounds, 659 (2016) 193-197.

3. Chengliang Zhao, Chaochao Dun, Qikui Man, et. al, Enhancement of plastic deformation in FeCoNbB bulk metallic glass with superhigh strength, Intermetallics, 32 (2013) 408-412.

1. 赵成亮，常春涛，门贺等，一种含磷和碳的母合金的熔炼工艺，发明，已授权CN201510318733.4

2. 赵成亮，常春涛，门贺等，塞尺带用非晶合金带材及制备方法，发明，已授权CN201410275727.0

3. 常春涛，王安定，赵成亮等，具有高饱和磁感应强度和强非晶形成能力的铁基非晶合金，发明，已授权CN201410285976.8

东莞理工学院机械工程学院：武静

2017.06-- 东莞理工学院 专任教师
2017.06-2017.09 澳大利亚科廷大学 访问学者
[1]. Jing Wu, Yu Wang, Weiwei Zhang, Zhenhua Nie, Rong Lin, Hongwei Ma. Defect detection of pipes using Lyapunov dimension of Duffing oscillator based on ultrasonic guided waves [J]. Mechanical Systems and Signal Processing, 2017, 82(1): 130-147. (中科院SCI二区，IF：6.471)
[2]. Jing Wu, Hong Hao, Jun Li, Yan Wang, Fei Yang, Hongwei Ma. Defect Detection in Pipe Structures using Stochastic Resonance of Duffing Oscillator and Ultrasonic Guided Waves. International Journal of Pressure Vessels and Piping.2020.187  (中科院SCI四区，IF：2.23)
[3] Weiwei Zhang, Hong Hao, Jing Wu, Jun Li, Hongwei Ma,Chen Li. Detection of Minor Damage in Structures with Guided Wave Signals and Nonlinear Oscillator [J]. Measurement. 2016. 06.033(SCI) (中科院SCI四区，IF: 3.364)
[4].武静, 张伟伟，聂振华, 马宏伟, 杨飞. 基于Lyapunov指数的管道超声导波小缺陷定位实验研究[J]. 振动与冲击, 2016, 35(1): 40-53. (EI)
[5].Jing Wu, Yu Wang, Weiwei Zhang, Hongwei Ma .The influence of white Gaussian noise on Duffing system[C]. 24th Australasian Conference on the Mechanics of Structures and Materials, Perth, Australia, 2016.12.6-2016.12.9. (EI)
[6].武静, 张伟伟, 马宏伟. 利用Lyapunov指数实现超声导波检测的实验研究[J].振动与冲击, 2014.33(24):82-87. (EI)
[7] 马宏伟；武静；张伟伟；莫应强；张喆斯；林荣.基于杜芬方程Lyapunov指数的超声导波检测方法. （授权号：ZL201310195803.2）授权时间：2016.3.9
[8] 马宏伟；武静；张伟伟；杨飞. 基于分数维的管道超声导波小缺陷识别与定位方法.
（授权号：ZL201510145418.6）授权时间：2017.7.4
[9] 武静；马宏伟；温宇立；张伟伟.基于Duffing系统的随机共振特性的超声导波检测方法.（授权号：ZL 201710407047.3） 授权时间：2019.10.08
[10] 马宏伟；武静；温宇立；张伟伟. 基于双稳态系统的超声导波信号检测方法.
（授权号：ZL 201710407036.5）授权时间：2019.6.28

东莞理工学院机械工程学院：王皓亮

2018-- 东莞理工学院 教师


在《Acta Materialia》、《Scripta Materialia》、《Journal of Alloys & Compounds》和《Materials Science and Engineering A》等期刊发表学术论文多篇

东莞理工学院机械工程学院：申芳华

添加东莞理工学院学姐微信，或微信搜索公众号“考研派之家”，关注【考研派之家】微信公众号，在考研派之家微信号输入【东莞理工学院考研分数线、东莞理工学院报录比、东莞理工学院考研群、东莞理工学院学姐微信、东莞理工学院考研真题、东莞理工学院专业目录、东莞理工学院排名、东莞理工学院保研、东莞理工学院公众号、东莞理工学院研究生招生）】即可在手机上查看相对应东莞理工学院考研信息或资源。